Texas Car & Truck Inspection FAQ

Texas car & truck inspection FAQ

State Vehicle Emissions Testing & Inspection

With routine vehicle inspections and periodic emissions checks, drivers can be familiarized with any mechanical problems with their cars. In case your car fails the inspection or the emissions test, you will know it requires some prompt attention and potentially some repair. Vehicle owners need to proceed with the repair as soon as possible because it might jeopardize the reliability of the car and even cause substantial fines or perhaps a disqualified registration. For that reason, it is highly recommended to have your vehicle examined by a competent specialist at least every six months to avoid all these inconveniences. Some frequently asked questions on vehicle inspection are outlined below.

What is On-Board Diagnostics or OBD?

The OBD or On-Board Diagnostics, or OBD II is a standard computer system implemented in all cars constructed in and after 1996. In other words, all the vehicles made in 1996 and after will certainly have an OBD system in them, which offers information records on self-diagnosis of the vehicle often utilized by automobile technicians before doing any vehicle repairs.

Common Causes of a Failed Emissions Test

An emissions test can fail for lots of factors as a result of malfunctioning car components such as an injector, oxygen sensing unit, spark plugs or even an EVAP system. One of the most typical causes is defective injectors. Either the injectors or a malfunctioning oxygen sensor can set off a “abundant air-fuel blend” resulting in an unsatisfactory emissions test.

If your vehicle has a worn-out ignition system, there is a higher possibility that it may be the cause of a rise in exhaust discharges. This, in turn, can result in a failed vehicle-emissions examination.

Any type of problem or deficiencies in the EVAP system or evaporative emission control system can cause an issue in the handling of the gasoline vapor released from the vehicle causing atmospheric pollution.

If your car hasn’t undertaken routine maintenance and the “check engine” light is lit up on the dashboard, your automobile might not pass the emissions test.

What Do They Check for in a Vehicle Inspection?

A licensed examiner carries out a car examination at state-approved examination stations only. This is what they will look for:

  • Front lights: front lights inspection to make sure of proper operation, no cracked lenses or lights, lights are the correct shade, are the same, and turn signals are operable.
  • Tail lights: Turn signals, marker lights, hazard lights, license plate lights, brake lights, reverse lights are operable, and no damaged taillights
  • Wheels and Tires: to inspect tire conditions for any indications of wear and tear and if there is a requirement for replacement
  • Mirrors: Make sure no mirrors are broken, damaged or missing
  • Seat belts: to examine seat belts’ condition and make sure they are safely working or require replacing
  • Brakes: a detailed brake inspection to ensure proper brake reaction and if there is any brake fluid leakages
  • Horn: ensure the horn is working correctly
  • Assessment of suspension and shock absorbers

How Long Does A Safety Inspection Take?

Depending on the state, city, and area where the vehicle tests are conducted, the car safety inspection duration may differ. Nevertheless, for a majority of cars, this process generally takes one hour to 90 minutes.

Texas Car & Truck Inspection FAQ | Toyota Dealership Richmond, TX

Saved Vehicles


You don't have any saved vehicles!

Look for this link on your favorites:


Once you've saved some vehicles, you can view them here at any time.

Contact Us

(281) 341-5900

Call Now

20465 Southwest Fwy • Richmond, TX 77469

Get Directions

Today's Hours:

Open Today! Sales: 9am-8pm

Open Today! Service: 7am-6pm

Open Today! Parts: 7am-6pm

Sterling McCall Toyota Fort Bend 29.558939, -95.695067.